STK 500 troubleshooting problems

STK 500 troubleshooting problems

 Problem 

A problem occured while executing the command. make sure that you are using the correct programming method.current mode is ISP …………..

 SOLUTION  ( 1 ) 

Step 1:

>> Go to the tab HW settings in the connection dialog and set the clock generator to max (3.6 MHZ) as shown in the following image

Step 2:

>> Go to the main tab and inprogramming mode and target settings press on settings.
>> Select the ISP frequency to be 115.2 KHZ and then press write.

SOLUTION  (2)

Disconnect all connections to all ports.